Ecosmart 701 series
- inorganic engineering plastic coat
1.Product Description:
Ecosmart inorganic engineering plastic consists of nano-polysiloxane
resin and natural stone powder, which could be applied on most
plastic surfaces and has strong abrasion resistance, fouling
resistance, corrosion resistance, high hardness, non-poisonous
and is non-pollutant.
2. Specification:
£¨1£©Inorganic product durable performance, no chalking and
decolorization.
£¨2£©Acid resistance, alkali resistance, corrosion prevention.
£¨3£©Non-poisonous, non pollutant..
£¨4£©Anti-flammable and heat resistance of between 300-800¡æ.
£¨5£©Ensure sufficient ventilation when in use.
£¨6£©Store in a well ventilated environment. No other special
requirement is necessary.
3£®Typical Uses: Any plastic surface.
4£®Ways of application: By brush, roller and spray.
5£®Color: Wide range of colors including transparent coat.
Please
refer to Rotol standard colors chart.
6£®Technical information:
£¨1£© Flare point:19.
£¨2£© Drying time: Touch 20mins (normal temperature 25¡æ), complete
dry requires 7days.
£¨3£© Specific gravity: 0.85~0.9
£¨4£© Viscosity: 48KU~55KU
£¨5£© Film thickness: Wet film:76Um. Dry film:25Um
£¨6£© Solid by volume:35-45%
£¨7£© Theoretical coverage:6-8©O/Kg, 11.25©O/Litre.
£¨8£© Thinning and cleaning agent: Isopropanol, methanol or
alcohol
£¨9£© Storage: Six months under Rotol standard (normal temperature
25¡æ)
7. Cares to be noted during application:
£¨1£©Avoid all contact with any organic solvent or oils.
£¨2£©Spray tools should be cleaned by alcohol before use.
£¨3£© Stir product thoroughly before use.
£¨4£© Avoid use under high humidity condition. (eg; cloudy or
rainy days is not
suitable for coating to be carried out)..
£¨5£© The surface should be cleaned without dust and oil.
£¨6£© Product is flammable. Avoid any direct heat source.
£¨7£© Avoid any direct contact with eyes or skins.
Inspection report
|
