Ecosmart 601 series - Inorganic water based cement floor coat
1.Product Description:
Ecosmart 601 series - Inorganic water based cement floor coat
consists of inorganic nano-polysiloxane resin and natural stone
powder which is environmental friendly. It can be applied on
cementitious substrate to give increase abrasion index and increase
the compressive strength which is non-pollutant and non-poisonous.
Specifications:
£¨1£©Inorganic product durable performance, no chalking and
decolorization.
£¨2£©Acid resistance, alkali resistance, corrosion prevention.
£¨3£©Non-poisonous, no pollution, no (V.O.C.£©
£¨4£©Inflammable and heat resistance up to 800¡æ.
£¨5£©Ensure sufficient ventilation during application.
£¨6£©Store in a well ventilated environment. No other special
storage
requirement is necessary.
2£®Typical Applications: Cementitious Substrate.
3£®Method of Application: By brush, roller and spraying.
4£®Coluor: Wide range of colours are avaliable. Please refer
to Rotol
standard colour chart.
5£®Technical information:
£¨1£© Flare point:19.
£¨2£© Drying time: Touch 20min (normal temperature 25¡æ), complete
dry 7days.
£¨3£© Specific gravity:
£¨4£© Viscosity:
£¨5£© Film thickness: Wet film:76Um. Dry film:25Um
£¨6£© Solid by volume:
£¨7£© Theoretical coverage:6-8©O/Kg, 11.25©O/Litre
£¨8£© Thinning and cleaning agent: Isopropanol, methanol or
alcohol
£¨9£© Storage: six months under Rotol standard (normal temperature
25¡æ)
6£®Precausiont to be noted during application:
£¨1£© Avoid all contact with any organic solvent or oils.
£¨2£© Spray equipments should be cleaned before application.
£¨3£© Stir thoroughly before application.
£¨4£© Avoid High humidity condition (eg; cloudy or rainy days
are not suitable
for application)
£¨5£© Surface to be coated should be thoroughly cleaned without
dust and oil.
£¨6£© Product is inflammable. Avoid any direct heat source.
£¨7£© Avoid any direct contact with eyes or skins.
Inspection report
|
