|
|
 |

Ecosmart 202 series water base metal top coat (water
based high temperature resistance metal top coat)
1. Product Description:
Ecosmart inorganic water based metal top coat is an inorganic
top coat consisting of transformed silicate and natural stone
powder. To achieve the optimum result of this high performance
top coat , we recommend the use of Ecosmart 201 series zinc
powder primer paint before the actual application of the metal
coat.
2. Specifications:
£¨1£©Inorganic product durable performance. No chalking and
decolorization.
£¨2£©Acid resistance, alkali resistance and prevent corrosion.
£¨3£©Water based, non-poisonous, non pollutant and zero V.O.C.
£¨4£© Anti-flammable and heat resistance of up to 300¡æ under prolonged
period and up to 800¡æ under short term momentary exposure.
£¨5£© Ensure sufficient ventilation when in use.
(6 ) No special requirement for storage. However heat preservation
is
needed for storage under 5 ¡æ.
3.Typical Uses: For ferrous metal hardware pre-coated with Ecosmart
201
series zinc powder primer paint.
4¡¢Ways of application: By brush, roller and spray.
5¡¢Color: Wide range of colors available. Please refer to Rotol
standard
colors chart.
6¡¢Technical information:
£¨1£© Flare point: none.
£¨2£© Drying time: touch 20mins (normal temperature 25¡æ)£¬Recoating
should be
applied after 4hrs, complete dry requires 7 days.
£¨3£© Specific gravity: mixing ratio 1.3~1.4
£¨4£© Viscosity:60~68KU
£¨5£© Film thickness: Wet film:120-150Um. Dry film:50-80Um
£¨6£© Solid by volume:40-50%
£¨7£© Theoretical coverage:5©O/Kg
£¨8£© Primer paint applicable: Ecosmart 201 series zinc powder
primer paint.
£¨9£© Thinning: De-ionized water or fresh water
£¨10£© Storage: Six months under Rotol standard (normal temperature
25¡æ)
7¡¢Precaution during application:
£¨1£© Avoid all contact with any organic solvent or oils.
£¨2£© Spray tools should be cleaned before coating.
£¨3£© Stir thoroughly before coating.
£¨4£© Avoid use under high humidity condition (eg; cloudy or rainy
days are not
suitable for coating to be carried out).
£¨5£© Surface to be coated should be thoroughly cleaned and without
dust and oil.
£¨6£© Product is flammable. Avoid any direct heat source.
£¨7£© Avoid any direct contact with eyes or skins.
Inspection report
|
|
 |
|